DRINK PERFECTOR INSTRUCTIONS

GENERAL CLEANING

  • As an antimicrobial metal, copper remains naturally bacteria free.

  • Simply run hot water through the coil to clean it.

  • Drying the coil after use helps prevent tarnishing.

  • The black reservoir, cup and rubber connectors are dishwasher safe.

  • If desired, the exterior of the copper coil may be polished using copper cleaner or by soaking the coil in a vinegar/water solution.

  • To disassemble the Perfector, pull the black reservoir toward the handle until it detaches from the cup.

  • To reassemble the Perfector, place the rubber connectors into the black reservoir and cup. Firmly insert the top end of the copper coil into the bottom of the reservoir. Then firmly insert the bottom of the tubing into the bottom of the cup.

 
Untitled design (45).png

HOT BEVERAGES

Take the assembled Perfector and fill it with the desired amount of ice (click for ice/temperature guide for desired ice level). Place the Perfector on top of your mug or cup. Slowly pour your hot beverage of choice into the black reservoir on top. Once the liquid has poured through the copper coil, swirl the Perfector in a counter-clockwise motion to be sure all the liquid has cleared the coil. Place the Perfector on the black microfiber cloth (included) to absorb any residual moisture. For best results, wait 1-2 minutes for the coil to reset before next use.

Video Instructions

Hot Beverage Photo DP 1_edited.jpg
Copy of Wine Photo DP 1.png
Untitled design (45).png

RED WINE

Take the assembled Perfector and fill with ice. We recommend adding a bit of water to the ice for maximum temperature reduction. Place the Perfector on top of your wine glass. Slowly pour your red wine of choice into the black reservoir on top. Once the wine has poured through the copper coil, swirl the Perfector in a counter-clockwise motion to be sure all the wine has cleared the coil. Place the Perfector on the black microfiber cloth (included) to absorb any residual moisture.

Instructions for Refrigerated White Wine

Add no ice, and follow the same instructions above.

Video Instructions

 
Untitled design (45).png

BOURBON 

Take the assembled Perfector and fill with ice. We recommend adding a bit of water to the ice for maximum temperature reduction. Place the Perfector on top of your bourbon glass. Slowly pour your bourbon of choice into the black reservoir on top. Once the bourbon has poured through the copper coil, swirl the Perfector in a counter-clockwise motion to be sure all the bourbon has cleared the coil. Place the Perfector on the black microfiber cloth (included) to absorb any residual moisture. For best results, wait 1-2 minutes for the coil to reset before next use.

Video Instructions

Bourbon Photo DP 1.jpg
 

BLACK COFFEE

Glass-Water-icon_edited.png

HOT TEA

WINE

BOURBON

ICED BEVERAGES

new logo white.png

Chip Gregory, Communications Manager / chip@drinkperfection.com

Karin Abrell, Brand Ambassador / karin@drinkperfection.com

The Drink Perfector - Cools beverages

© 2020 Drink Perfection, Inc. All Rights Reserved. Patented Drink Perfection.